Aluminum Alloy Plate

5052 Aluminum Alloy Plate

5052 aluminium plate also retains exceptional strength after welding. It has the highest strength of non-heat-treatable alloys. 5052 aluminium is known for its exceptional performance in extreme environments. It is highly resistant to attack by both seawater and industrial chemical environments. And 5052 aluminum plate also retains exceptional strength after welding. It has the highest strength of the non-heat-treatable alloys but is not recommended for use in high temperatures environments.

Aluminium Grade: 5052

Width: 800-4300mm

Thickness: 6-300mm

Length: 2000-38000mm

Temper: O, H24, H34, H16, H26, H36, H18, H28, H38, H112, F,etc.

Certificate: DNV/ABS/Lioyds/BV

Packingblank waterproof paper, kraft, wooden case or pallet (fumigation report for the wooden packing material)

Features: very good elongation, anti-corrosion performance

Overview of 5052 Aluminium Alloy Plate

5052 aluminum alloy plate has higher strength and better thermal conductivity than 5052 aluminum plate. In the tempered condition, it maintains good formability due to its excellent ductility. Ideal for welding and can be cold work hardened. Due to its excellent general corrosion resistance properties, 5052 aluminum alloy can be used in marine applications. Alloy 5052 is especially suitable for the cryogenic market because it can withstand extremely low temperatures without becoming brittle or losing properties. Alloy 5052 has been used in vehicle armor plates due to its high strength factor.

Features of 5052 Aluminum plate

1. Corrosion resistance

It is susceptible to stress corrosion cracking, which limits its application temperature to below 65°C and limits the amount of cold work to ¼ Hard.

2. Heat treatment

The hardness of 5052 aluminum alloy cannot be enhanced by heat treatment. It can be significantly hardened by cold working (cold rolling) and produces various "H" tempers - most commonly H32 (¼ hard) or similar strength marine tempers H116 and H321 - as well as soft annealed O tempers.

3. Welding

Almost all standard electric welding of 5052 aluminum alloy has excellent weldability, GMAW and GTAW are preferred and widely used to produce structural welds.

Applications of 5052 Aluminum Plate

  • Pressure vessels

  • Marine equipment

  • Electronic enclosures

  • Electronic chassis

  • Hydraulic tubes

  • Medical equipment

  • Hardware signs

Manufacturer of 5052 Aluminum Plate

Staral Alloy is a professional aluminum supplier, providing users with different types of aluminum products. The price of aluminium is not only low, but also has high corrosion resistance. We strictly control the production process of each product to ensure high quality.

 

 

Mechanical Properties for 5052 Aluminum Alloy

Mechanical Properties

Metric

English

Ultimate Tensile Strength

228 MPa

33000 psi

Tensile Yield Strength

193 MPa

28000 psi

Shear Strength

138 MPa

20000 psi

Modulus of Elasticity

70.3 GPa

10200 ksi

Shear Modulus

25.9 GPa

3760 ksi

Technique specifications of Aluminum Plate

Aluminum Al: allowance

Silicon Si: ≤ 0.25

Copper Cu: ≤ 0.10

Mg: 2.2~2.8

Zn: ≤ 0.10

Manganese Mn: ≤ 0.10

Chromium Cr: 0.15 ~ 0.35

Fe: ≤ 0.40

Note: single: ≤ 0.05; Total: ≤ 0.15

 


Send an Inquiry

Your email address will not published. Required fieled are marked.